Universal Rubber Pipe Boot - 10 Boots, 1" to 6"
- Black Universal Pipe Boot w/ Steel Clamp Ring & Bottom Side Seaming Tape
- Professional Roofing Accessories
- Free Shipping - Delivered Price in the 48 States
Roofing Materials & Accessories - Universal Rubber Pipe Boot (1 Case)
Lottes Roofing Wholesale Distribution
126 Point West Blvd.
St. Charles, MO 63303
"More than 30 years of experience in single ply flat roofing products"
Orders Containing Multiple Items May Qualify for Reduced Shipping
Call us at: 1-888-895-4465 or Email at: firstname.lastname@example.org
Our Technicians can design and determine what you need for your roofing project and give you a complete estimate for your materials as well as instruct you about your installation process!
10 COUNT 1" to 6" Universal Black Rubber Pipe Boot:
Universal pipe boot with stainless steel clamp ring and laminated butyl seaming tape on bottom side of pipe boot flap.
Contact surfaces for the PIPE BOOT TAPE shall be cleaned to remove construction dirt using a light application of unleaded gas on a clean, lint-free rag. After cleaning apply Anjon primer to surfaces before applying seam tape.
Molded pipe boots offer a simple and reliable means to seal small pipes such as sewer vents and electrical service entry conduit.
Seam Tape is pre-applied to the bottom flange of the boots which extends 3” onto the roof. Molded ridges mark each pipe size for cutting: always cut above the ridges! A stainless-steel hose clamp is provided, but a tube of Caulk for EPDM is required for installation.
STEP 1: Cut just above the molded ridge
corresponding to the desired pipe size
STEP 2: Clean the rubber roof
surface surrounding the pipe boot
STEP 3: Lower the pipe boot over the
pipe with the release paper in place
STEP 4: Slowly pull the release
paper to expose the seam tape
STEP 5: Roll firmly with a steel
roller to bond the boot to the roof sheet
STEP 6: After cleaning around
the boot flange, caulk the edge
STEP 7: After cleaning the top of the
boot, caulk between the boot and pipe
STEP 8: Screw the hose clamp
around the top of the pipe boot
1 case - 10 count Universal Rubber Pipe Boot - 1" - 6"
- Product Code: 201
- Availability: In Stock